Get Pc Memory

30 Responses to “Download Dell XPS M1530 Notebook Windows XP Drivers”

1. thamarai says:

   January 27, 2009 at 12:11 pm

   can u help me how to download drivers for free…
2. Shankar Banerjee says:

   January 27, 2009 at 4:05 pm

   pls i want to do free download pls give me the permission for that
3. Bandit5906 says:

   February 2, 2009 at 4:49 am

   When you click on a download link and a new page opens that is of uploading.com, click on “download free” on that page. After that wait for the timer to finish and than click on “download”!

   Enjoy!
4. Matthew says:

   February 5, 2009 at 5:50 am

   I cannot get the AHCI driver to install. I got all the others i believe but when i try to install the AHCI it says system does not meet minumum requirements. I tried everything but got no where. Any idea????
5. Kazim says:

   February 13, 2009 at 6:12 am

   Dear Sir

   Kindly give me free link for downloading Driver of Dell XPS M1530 for Window Xp .I need Lan Card and VGA Drivers .
   Thanks you in Advance

   Regards

   KAZIM
6. Odwraca says:

   February 27, 2009 at 7:41 pm

   All of the links are free you just have to be patient and wait for the download timer to go down….
7. Sergey says:

   March 1, 2009 at 8:29 pm

   Hi, I have the same problem as Matthew. I have installed winXP SP3 and all drivers. But I can’t get the AHCI driver to install. When I try to install the AHCI it says system does not meet minumum requirements. Can U help me?
8. Doug says:

   March 4, 2009 at 6:28 am

   A couple of corrections, one of which should help some of you who have already posted questions about getting AHCI installed and working. The proper way to address the AHCI problem is _NOT_ to turn it off in BIOS! During the first phase of installing Windows XP, there is an opportunity to press F6 to pause the install while you supply Windows XP Setup with needed third-party RAID/SCSI drivers (including AHCI). That is what is needed: Do the F6 option. (Before you get ready to install Windows, download the AHCI “BIOS” drivers to a floppy disk. This is a small set of INF and SYS files. When you press F6, you will be given the chance to provide that floppy. Then, Windows will be able to continue, while AHCI is still enabled in BIOS. Afterward, when Windows XP is installed, the AHCI “windows installer” needs to be run from within Windows, as a second step in the process.
9. Dong Truong says:

   March 5, 2009 at 3:10 pm

   Following Doug comments, How can we connect floppy drive on dell xps? thanks
10. yunus says:

    March 7, 2009 at 7:26 pm

    pass – send my- software pass

    send — Dell-XPS-M1530-Intel-Wireless-Driver-For-XP
11. Clark says:

    March 29, 2009 at 3:16 pm

    can you please tell me if here is alternative way of installing ACHI drivers installed without using a floppy drive as i ddon’t have a usb floppy drive.

    Thanks
12. clark says:

    March 31, 2009 at 6:39 pm

    I know i might sound a bit stupid but the achi file you downloaded does not fit onto the floppy drive. Please help
13. andri says:

    April 22, 2009 at 2:19 am

    i still don’t understand how to install AHCI?
    currently, i have installed windows xp in my xps 1530 but using ATA
    should we change to AHCI? if so, why?
14. Omer says:

    April 28, 2009 at 8:49 pm

    is there any difference between the USB-Floppy disk and USB-CD Rom? The AHCI files are not working on USB-CD ROM!!!!!
15. William says:

    May 7, 2009 at 7:51 am

    after clicking download,
    type in address line:
    javascript:document.getElementById(‘downloadform’).submit();
    then hit ‘enter’.

    Work for Firefox
16. shmuga2 says:

    May 7, 2009 at 3:03 pm

    Thanks
17. Akshay says:

    June 1, 2009 at 7:34 am

    Hi,

    This is a amazing. Job well done. All though there were lots of blogs and discussion forums on XP drivers for XPS 1530, none of them were this detail and as singular a source for drivers as this one. Makes one easy job.
    I have one question though. My XPS1530 has a Blu-Ray writer. Any chance I can find the XP drivers for them? I searched everywhere without success. That is the only thing that is stopping me from downgrading to XP. Any help or pointers would be really helpful and I will be greatful to you.

    Once Again thanks a ton.
18. Sri says:

    June 15, 2009 at 2:06 am

    Hi All,

    I got all the drivers installed except “AHCI drivers” when i try to install the AHCI it says system does not meet minimum requirements,but Win XP SP2 is working fine with one problem
    The problem is,I have XPS M1530 with 4GB RAM,after i installed Win XP SP2 my RAM is showing as 3.5GB.Looking forward for a resolution.

    Cheers
    Sri
19. Torch says:

    July 16, 2009 at 8:57 pm

    Wow, this does look to be a great singular source for drivers for the XPS M1530. I too am concerned about the Blu-Ray disc writer drivers for my machine however.

    Can anyone comment on their experience installing the AHCI drivers the way Doug suggested (during the XP install, press F6 , install driver, minus the floppy of course)? Will the XP install process _NOT_ allow reading from a CD or something, which requires a Floppy to USB adapter?

    Thanks,
    Torch
20. Torch says:

    July 16, 2009 at 9:03 pm

    I think I see the delima now, you CAN’T eject the XP Install compact disc with out consequently interupting it and therefore must install the AHCI driver another way. If USB works during the process, what about flash drive or external hard-drive or even the camera card port? Please tell me you do not need PCI or PCMCIA adapter for floppy.
21. Excellentnuke says:

    August 8, 2009 at 6:08 am

    I need the CD Drive drivers. It’s undetected my XPS M1530 running on Windows XP.
22. KN Rao says:

    August 18, 2009 at 1:27 am

    Thanksssssssssssssssss

    I am searched from long time.. and I found drivers from diff. sources .. but this is the shartcut source for all

    very nice and thnaks for organizors
23. Rony says:

    August 31, 2009 at 8:06 pm

    i still don’t understand how to install AHCI?
    currently, i have installed windows xp in my xps 1530 but using ATA
    should we change to AHCI? if so, why? Please lpease please help meeeeeeeeeeeeee

    Thankz
24. Michael says:

    September 11, 2009 at 5:31 pm

    to install AHCI drivers on this laptop you’ll need to download and install nLite. There are walk through’s on the net to help get through this. Essentially with nlite you’ll take a Windows XP cd and Integrate the drivers into it, well on another blank CD. Hope that helps
25. Led says:

    September 18, 2009 at 3:30 pm

    Hi everyone !
    my 1530 XP don’t find the bluetooth hardware .
    Anybody know how to solve this problem
    thanx
26. Bijosn says:

    October 8, 2009 at 4:41 pm

    thanks for the links.

    For those struggling with ahci driver problems on WinXP, see
    the first post\OP in the thread below. It should solve all your problems without you having to slipstream or use a floppy.

    http://forum.notebookreview.com/showthread.php?t=164159

    credit to kent1146

    Once you have complete the procedures listed above and rebooted your pc in ahci mode (set in bios), you can then install the new complete ahci drivers specified on this page.
    http://www.getpcmemory.com/goto/AHCI_zip/1060/2
27. rios says:

    October 27, 2009 at 11:04 pm

    thanks for the links, they all seem to work fine. However, I can’t seem to conect to the internet, in that I can find google but when I go to windows update or in fact any download site it loses connection, at my wits end here, I checked my browser options and adapters but nothing seems to work, everytime I just lose connection. Its an external broadband modem. I working on a dell xps m1530 downgraded to xp sp3. Anyone out there that can help
28. Ken says:

    October 31, 2009 at 11:23 am

    I have installed xp and all the drivers. everything is working perfectly fine besides wireless connection… don’t know why but wireless drivers are not installed.
    Anybody help me out here with wireless drivers…
29. Ryba says:

    September 14, 2010 at 11:23 pm

    Great article that’s why I decided to write the solution here. You don’t have to disable flash* and ahci. You just need:
    windows installation CD
    installed nLite
    drivers for your HDD 32-??bit Intel® RST Driver Files for F6 Install http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18860&ProdId=2101&lang=eng
    64 – probably it doesn’t matter

    1. run nLite
    2. next
    3. browse to windows cd location
    4. target destination to save files
    5. wait till all files will be copied on hdd
    6. 2 x next
    7. In task selection activate buttons: drivers, bootable iso. Here you can modify your image (extra drivers, service pack, customization of installation etc.)
    8. next
    9. insert – multiple driver folder – OK – select from the list Intel(R) ICH8M-E/M SATA AHCI Controller
    10. next
    11. agree to start process
    12. press button Make ISO
    13. …
    Now you have your own windows instalation cd with appropriate hdd drivers ready to install Win XP on your M1530. You don’t have to press f6, enable ATA, etc…
    Regards,
30. Steinar says:

    October 14, 2010 at 8:18 am

    Hi there
    Can anyone tell me why the nvidia driver doens’t work, or if i’m doing something wrong?

    thanks for the drivers though, brilliant!

Leave a Reply

Click here to cancel reply.

Name (Required)

Mail (will not be published) (Required)

Website